Raymarine AIS

Overview
See and be seen with the Raymarine AIS500 Transceiver module. Receive AIS targets and transmit your vessel information to other AIS receivers.

The AIS500 easily interfaces to Raymarine multifunction displays allowing AIS targets to be graphically overlaid in both chartplotter and radar modes.

Operating in the VHF maritime band, the AIS500 system includes a built-in VHF splitter, to easily integrate with your existing VHF antenna on the boat (no need for a separate antenna). The AIS500 enables the wireless exchange of navigation status between vessels and shore-side traffic monitoring centers. Commercial ships, ocean going vessels and other boats equipped with AIS transmitters broadcast AIS messages that include the vessel’s name, course, speed, and current navigation status.

AIS500 Features
Class B AIS Receive & Transmit
Dual Channel AIS Monitoring Ability – Vessel monitoring of class A and B transmissions over both standard VHF frequencies.
Built-in NMEA multiplexer
VHF Splitter – No need to buy a separate antenna. Utilize your existing VHF antenna and cable.
Includes dedicated external GPS antenna (16 channels)
NMEA 0183 - Compatibility with Raymarine A, C, E and G Series, as well as other manufacturers’ units that display AIS targets
Buddy Tracking via Raymarine MFD – Distinguish favorite targets (MMSIs) from others by adding to favorite list.
Silent Mode – Turn off transmit function during tournaments or races if you do not wish to be seen.
Targets displayed on chart and radar screens
LED Status Indicator
Configure via PC Software
Software upgradeable through PC and RS232

Specifications
Channel Spacing: 25 kHz
Antenna Impedance: 50 Ohm
NMEA sentence: VDM
NMEA input (0183): 1 x 38400/1 x 4800 Baud
NMEA output (0183): 1 x 38400/1x 4800 Baud
Dimensions (WxHxD) mm: 273x187x62
Weight: 1.2 lbs (0.54kg)
Mounting methods: Bulkhead
Operating voltage: DC 10.8~32V
Power consumption: 200mA
AIS Data Rate: 9600 BpS
Operating Frequencies: 161.975 and 162.025 MHz (multiplexed)
Sensitivity: <-109dBm (receiver only)
Operating Temperature: 14° to 131° F (-10° to 55° C)

AIS500 Features
Class B AIS Receive & Transmit
Dual Channel AIS Monitoring Ability – Vessel monitoring of class A and B transmissions over both standard VHF frequencies.
Built-in NMEA multiplexer
VHF Splitter – No need to buy a separate antenna. Utilize your existing VHF antenna and cable.
Includes dedicated external GPS antenna (16 channels)
NMEA 0183 - Compatibility with Raymarine A, C, E and G Series, as well as other manufacturers’ units that display AIS targets
Buddy Tracking via Raymarine MFD – Distinguish favorite targets (MMSIs) from others by adding to favorite list.
Silent Mode – Turn off transmit function during tournaments or races if you do not wish to be seen.
Targets displayed on chart and radar screens
LED Status Indicator
Configure via PC Software
Software upgradeable through PC and RS232

Overview
The Raymarine AIS250 Receiver module is a 'listen only' AIS receiver that easily integrates with an existing VHF antenna using a built in VHF splitter. The AIS250 then interfaces to Raymarine multifunction displays, allowing AIS targets to be graphically overlaid in both the chartplotter and radar modes.

Operating in the VHF maritime band, the AIS system enables the wireless exchange of navigation status between vessels and shore-side traffic monitoring centers. Commercial ships, ocean going vessels and other boats equipped with AIS transmitters broadcast AIS messages that include the vessel’s name, course, speed, and current navigation status.

Overlay AIS targets in radar and chartplotter modes
AIS250 System Requirements

VHF Antenna
Chartplotter, Multifunction display or PC application with NMEA 0183 input and AIS compatibility

Raymarine Multifunction Displays Requirements

C Series software version 3.18 or higher
E Series software version 3.22 or higher
Product info from Raymarine